Chicken feed manufacturing plant working process

Chicken feed manufacturing plant is mainly used to produce various kinds of chicken feed pellets, such as baby chicken feed pellets, laying chicken feed pellets, hens feed pellets, and broiler feed pellets. The working process is mainly precleaning, crushing, mixing, pelletizing, cooling, screening and packing.

chicken feed macnufacturing plant

The equipment of the precleaning section is drum type precleaner, powder sieve, and permanent magnet sleeve. This section is to remove impurities such as rope, paper, stones, and iron filings mixed in the raw materials. After being cleaned, the raw materials are sent to the precrushing bin by the bucket elevator. Then, raw materials enter the feed grinder machine. The feed grinder machine is crushing the raw materials into powder which is convenient for the subsequent procedures. After that, the powder is transmitted to the feed mixer machine. The feed mixer machine is for the distribution evenly of raw materials and other additives. Then all the materials enter the chicken feed pellet machine. The chicken feed pellet machine is a vital machine in the production of feed pellets. In pelletizing section, the materials, through conditioning, enter the pelletizing chamber. In the chamber, the powder is strongly squeezed by the ring die and the pressure roller to form pellets. To make the pellets save longer, they are transmitted to the counterflow cooler to adjust the temperature. After cooling, the pellets can be packed.

In using the chicken feed pellet machine, you should be attention to the following tips.

  • Chicken feed pellet machine for sale and also its upper magnet is needed to be regularly cleaned. If you do not clean, the iron in the feed inlet may enter the ring die of the chicken feed pellet machine, which affects the normal working of the equipment.
  • The wear solution of the ring die and pressure roller should be checked at set intervals. The wear of the pressure roller may affect the production capacity, which would influence the quality of pellets.
  • Checking the cutter of the chicken feed pellet machine. The cutter is worn too blunt, which would decrease the forming rate of the feed pellets.
  • When changing raw materials, the cone bucket above the chicken feed pellet machine and the finished product bin should be completely emptied to prevent mixing.
  • You can extend the conditioning time. This can increase starch pasting and reduce the production of harmful microorganisms. It also can improve production efficiency and pellet quality.

Animals need to eat nutritionally balanced feed for a long time to get benefits, which are closely related to the operation of animal feed equipment. How can a chicken feed pellet machine be more durable? You need to pay attention to the following points.

  • Do a good job in the test run before the formal production. Before using the new pressed film, the hole of the ring die should be checked to whether it is smooth and vertical and whether the hole inlet is correct and smooth. After the heat treatment of the ring die, it should be checked whether the die hole is polished or not, and whether the finish of the die hole is enough or not.
  • Reasonably master the load of the chicken feed pellet machine. The load degree of the animal feed equipment has a great impact on the output and quality of the feed pellets.
  • The moisture content of materials should be controlled. If the moisture content of the material is appropriate, the output and quality of the chicken feed pellet machine can be improved. For the safe storage and transportation of granular materials, the moisture content should be well controlled.

Thus, before the chicken feed pellet machine is formally put into use, the above points must be carefully checked. In the whole chicken feed manufacturing plant, inspection and maintenance of the equipment are required before production to ensure the quality of the pellets.

RICHI Machinery, located in Zhengzhou, Henan Province, China, has been engaged in the production of pellet manufacturing equipment for more than 27 years. RICHI can provide you with various chicken feed manufacturing plant of 1-100t/h. RICHI Machinery also provides a one-stop service. It has a professional system from structural design, equipment production, and installation to after-sales service.

richi machinery

New type organic fertilizer pellet making machine

Organic fertilizer pellet making machine is an updated technology product developed after years of compound fertilizer processing equipment design and production experience. It is used to granulate various organic substances after fermentation, which breaks through the conventional organic granulation process.

Before granulation, the raw materials do not need to be dried and pulverized, and spherical particles can be processed directly with ingredients, which can save a lot of energy.

The angle of the granulating disc adopts an overall arc structure, and the granulation rate can reach more than 93%. The organic fertilizer pellet making machine granulating disc is equipped with three discharge ports, which is convenient for intermittent production operations, greatly reducing labor intensity and improving labor efficiency.

Reducer and motor adopting flexible belt drive, stable starting, slowing down the impact force, and improving the service life of the equipment. The bottom of the granulation plate is reinforced with a number of radiant steel plates, which is sturdy and durable, and can be deformed.

Thickened, heavier, and sturdy base design does not require anchor bolts to fix , running smoothly. The main gear of the organic fertilizer pellet making machine is quenched by high frequency, and the service life is doubled.

The organic fertilizer pellet making machine disc is lined with high-strength glass fiber reinforced plastic, which is anti-corrosion and durable. The machine has uniform granulation, high granulation rate, stable operation and strong equipment. Durable, long service life and other characteristics, is the ideal equipment for the majority of users to choose.

1.Features of the new organic fertilizer machine:

  • The pellets produced are spherical. The ball formation rate is 70%, there is a small amount of returned material, the particle size of the returned material is small, and it can be re-granulated.
  • Organic content can be as high as 100,000, and pure organic granulation can be realized. The pressure roller is adopted, and the two ends are at the same speed as the inner and outer rings of the die plate. There is no dislocation friction between the wheel and the die, which reduces the resistance, reduces the kinetic energy loss, prolongs the service life of the die, and reduces the organic fertilizer pellet millproduction cost.
  • Using the feature that organic particles can inlaid and grow with each other under a certain force, no binder is needed during granulation. It is lined with rubber engineering plastics, and the raw materials are not easy to stick to the cylinder, and play a role in anti-corrosion and heat preservation.
  • The granules are firm and can be sieved after granulation, reducing drying energy consumption. The multifunctional flat film organic fertilizer pellet making machine( can produce pellet feed, organic fertilizer, and cylindrical pellets. It can also be connected to polishing equipment, so that cylindrical pellets can be rolled into balls at one time, without returning pellets, with high pelletizing rate, good strength and beautiful appearance. The organic fertilizer pellet making machine( is an ideal equipment for the production of organic fertilizers today.
  • The organic matter after fermentation does not need to be dried, and the moisture content of the raw material can be 20-40%. The steam heating is introduced to increase the temperature of the material, so that the moisture content of the material is low after the material is formed into a ball, and the drying efficiency is improved. The output is large, the power consumption is low, and the maintenance cost is low. The pressure rollers of the organic fertilizer pellet making machine are evenly arranged, and the operation is stable.

At the same time, the pressing area is increased, and the production efficiency is improved. The screw center pressure regulating structure is adopted, and the gap between the molds increases and decreases, which is suitable for different materials to ensure the pressing effect. This model is equipped with Φ1.5-Φ20mm various aperture molds, which are suitable for granulation of different materials and achieve better benefits.

organic fertilizer pellet making machine

2.The structure principle of organic fertilizer pellet mill

The pressure roller of this model organic fertilizer pellet making machine adopts inclined wheel. And the two ends are consistent with the line speed of the inner and outer rings of the die plate, and there is no dislocation friction between the wheel and the die, which reduces the resistance, reduces the kinetic energy loss, and prolongs the service life of the die.

The pressure rollers are evenly set and run smoothly, eliminating the easy feeding phenomenon of ordinary flat die pressure rollers. The central pressure regulating structure is adopted to adapt to different materials and ensure the pressing effect. Compression molding of wood chips, corn stalks, etc. requires a lot of pressure.

In the same kind of fertilizer pelletizing equipment, the roller part is the central part of the whole equipment, and the high-quality alloy steel is used to improve the service life of the roller.This model organic fertilizer pellet making machine is equipped with a variety of aperture molds, which are suitable for granulation of different materials and achieve better results.

Organic fertilizer pellet making machine is filled with steam, gas ammonia or phosphoric acid or nitrogen solution, phosphorus ammonia slurry, heavy calcium slurry to complete the chemical reaction and heating compound fertilizer granulation process in the cylinder; or add a small amount of water The process of cold granulation of compound fertilizer.

The material to be granulated is passed through the rotary motion of the cylinder, and the rolling rotation occurs when there is no material in the cylinder, and it is aggregated into balls under a certain humidity and temperature, and the ball-making process is completed.

3.Application of organic fertilizer pellet making machine:

Mainly suitable for coarse fiber granulation, such as: wood chips, rice husks, cotton stalks, cottonseed husks, weeds and other crop straws, household waste, factory waste, low adhesion rate, difficult to shape materials granulation, but also suitable for granulation. Low-temperature granulation of biological bacterial fertilizer, organic fertilizer, compound fertilizer, etc.

The use and characteristics of the press organic fertilizer pellet making machine: the extrusion organic fertilizer pellet making machine is a new generation of granulation equipment developed by our company.

It is produced by non-drying and normal temperature process, one-time molding, and the output is 1-1.5 tons/hour and 1.5-3 tons/hour. The equipment has low investment, quick effect and good economic benefits.

The complete set of organic fertilizer pellet making machine is compact in layout, scientific and reasonable, and advanced in technology. Energy saving and consumption reduction, no discharge of three wastes, stable operation, reliable operation and convenient maintenance.

The raw material has wide adaptability and is suitable for granulation of various raw materials such as compound fertilizer, medicine, chemical industry, feed, etc. The product has a high granulation rate.

It can produce various concentrations and various types of compound fertilizers (including organic fertilizers, inorganic fertilizers, biological fertilizers, magnetic fertilizers, etc.). In particular, the granulation of rare earth, potash fertilizer and ammonium bicarbonate series compound fertilizers fills the domestic gap and ranks at the domestic level.

The organic fertilizer pellet making machine is used to granulate various organic substances after fermentation, which breaks through the conventional organic granulation process. There is no need to dry and pulverize the raw materials before granulation, and the spherical particles can be processed directly with ingredients, which can save a lot of energy.

The internal rotating tooth organic fertilizer pellet making machine developed and produced by our unit has specifications such as Φ600, Φ800, Φ1000, Φ1200, Φ1800, Φ2000, etc., and can also develop and produce other specifications according to user requirements. The shell of the organic fertilizer pellet machine is made of thickened seamless steel pipe, which is strong and durable, and can be deformed.

floating fish feed making machine

Introduction of floating fish feed making machine

In order to reduce the feed cost and fish diseases in aquaculture farms, Richi Machinery has launched a floating fish feed making machine; the fish pellet feed produced by the fish feed pellet extruder can effectively prevent and control fish diseases.

1.Useof floating fish feed making machine

Fish feed pellet machine is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small floating fish feed production line.

2.Precautions when using floating fish feed making machine

  • When the fingerlings are stocked, when the water temperature is low, the growth is slow, and the size is small, the pellet diameter of the feed should be controlled at about 2mm; when the temperature rises and the growth of fingerlings is accelerated, the diameter of the feed pellets in the mid-term should be 3-3.5mm , and later in 4-4.5mm.Therefore, when using the floating fish feed making machine to process fish pellet feed, the size of the feed pellets should be adjusted according to different periods to achieve the best feeding effect.
  • Because the fish has no stomach, the feed stays in the intestinal tract for a very short time, and the digestion and utilization rate is not high; therefore, when feeding the feed, it should be fed several times, and each feeding should be a little less feed utilization.
  • Fish pellet feed contains 12% – 14% of water during the floating fish feed making machineproduction process, and it is not easy to store for too long, so as to avoid deliquescence, mildew, and disease after feeding the fingerlings, so it is best to produce and feed it at the same time.
  • In order to better prevent the release of diseased fish fingerlings, adding 1% salt to the feed powder before production can effectively prevent the occurrence of diseases of fingerlings.

3.Performance of floating fish feed making machine

  • Scientific and reasonable structural design, simple, small footprint and low noise.
  • Small floating fish feed making machine for dry in and dry out, easy to make materials, high output and low energy consumption.
  • This floating fish feed making machine has a high pellet forming rate, and the resulting pellets have high hardness and smooth surface, which is convenient for storage and transportation.
  • This model floating fish feed making machineis equipped with Ø1.5—- Ø20 kinds of aperture molds, which are suitable for granulation of different materials and achieve better results.
  • Adapt to different materials to ensure the pressing effect.
  • Simple operation and maintenance, safe and reliable
  • Strong adaptability to the workplace
  • The floating fish pellet machinebody is cast as a whole, the structure is firm and the appearance is beautiful, and the service life is long.

floating fish feed making machine

4.Advantages of RICHIfloating fish pellet machine

  • Uniform discharge, smooth pellets, and output increased by 50%.
  • The produced granules by floating fish feed making machine are formed at one time, with high hardness, smooth surface and sufficient internal ripening, which can improve the digestion and absorption of nutrients. Better for storage.
  • The floating fish feed making machine has humanized design, small footprint, low noise, emergency button, simple and safer operation.
  • RICHI floating fish food machine can be customized according to customer needs.
  • RICHI floating fish feed making machine belongs to the factory direct sales, there is no middleman, the price is cheap, the profit is low, and it is all installed and debugged before delivery, and then packed and shipped.
  • RICHI floating feed making machine is packed in plastic (plastic waterproof) before delivery.
  • Before the final delivery, the floating fish feed pellet making machine is put on all-wood packaging, and the whole machine is packed in a wooden box to ensure that the floating pellet machine reaches the destination safely and without damage.

5.Process composition of floating fish feed extruder:

  • Mixing machine: Add a certain proportion of water to the raw materials, such as corn flour, rice flour, soybean flour, fish meal, meat meal, grain flour, additives, etc., and mix them evenly.
  • Feeder: Using the motor as the power for screw conveying, the mixed raw materials are transported to the feeding hopper of the floating fish feed extruder machine to ensure convenient and fast feeding.
  • Twin-screw floating fish feed extruder: In the case of high temperature and high pressure environment and screw extrusion, the mold can be replaced by adjusting the process to produce different feeds, and the specific pelletsize and shape can be changed.
  • Conveyor: to transport the feed to the oven.
  • Multi-layer oven: Most of the ovens are electric ovens, the temperature is adjusted between 0-200 degrees through the control cabinet, and the interior is a stainless steel double-layer mesh bag, which reduces the moisture of feed pellets, promotes the curing rate, and increases the shelf life.
  • Seasoning line: The oil sprayer sprays oil, food attractant, etc. The seasoning drum includes octagonal drum, cylinder, lifting single drum, and double drum seasoning line. According to the output and product properties, the oil is sprayed on the surface of the feed, and sprayed at the same time. Minced meat and spices, sprinkle evenly.
  • Cooling and conveying: reduce the temperature of frying and feed, promote the solidification of oil, reduce the temperature of pellets, and facilitate packaging.
  • Vibrating sieve: sieve off excess external material and pellets at the end of the year to ensure the quality and the reuse of raw materials.
  • Packaging machine: manual sealing machine and automatic packaging machine can be used.

6.Questions about floating fish feed making machine

(1)Q: Which is the best small floating fish feed making machine?

Answer: At present, there are many manufacturers of small floating fish feed pellet machines, which are mixed. In order to avoid purchasing machines with poor quality, users should choose regular manufacturers to buy them.

A professional floating fish feed making machine manufacturer should have the following three points:

  • A regular floating pellet machine manufacturer.
  • Excellent machine quality,
  • Perfect after-sales service.

(2)Q: Is the small floating fish feed making machine durable? how much is it?

Answer: You must be familiar with the small floating pellet machine. What is the effect of this machine? Is it easy to use? This floating fish feed making machine is a feed processing equipment specially designed for breeding poultry.

  • The compound feed formula has a variety of raw materials. Nutritional balance.
  • Reduce disease and improve survival rate.
  • Save feed cost for breeders and improve economic benefits. The specific price requires the user to determine the model first, and then let the floating pellet machinemanufacturer quote.

(3)Q: How much is the price of the small floating feed extruder machine?

Answer: The decisive factor for the price of the small floating feed extruder machine lies in the output, raw materials and power. The higher the output, the higher the price of the corresponding floating fish feed making machine, and the greater the power, the higher the price.

Therefore, before purchasing, first decide how much output you want, and then let the floating fish feed making machine manufacturer give an accurate quotation.

(4)Q: How much is the small fish feed pellet machine?

A: The power of the small floating fish feed making machine is 2.2kw with two-phase electricity, and the hourly output of feed pellets is about 60-100 kilograms. The price of a high-quality machine with a motor is about 2000-200000USD.

(5)Q: What is floating feed machine price?

Answer: Thefloating fish feed pellet mill is a multi-functional feed pellet machine, which can be used to process animal feeds such as chickens, ducks, and geese, improve the survival rate. The price is 2000-200000USD.

biomass pellets making machine

How to choose a suitable biomass pellets making machine?

In recent years, with the rapid development trend of my country’s fuel pellet field, the field of biomass pellets making machines developed by pellet machine manufacturers has also developed rapidly.

The biomass fuel pellet machine can make the regenerated crop raw materials into fuel pellets through various technological processes, so as to achieve the actual effect of the reuse of waste crops. The biomass pellets making machine industry chain involves many social and economic industries.

It is not only an indispensable basic production stage for a large number of industries and agriculture, but also plays a key role in my country’s response to environmental pollution of waste crops, improving the reuse rate of waste crops, and establishing and improving crop recycling management.

For renewable fuel pellet enterprises, how to choose a biomass pellets making machine suitable for their own application is particularly important.

Because the working pressure of waste crop extrusion is different, it is impossible for one pellet machine to make all fuel pellets. The general biomass granulator can recycle and granulate waste crops in daily life.

Therefore, biomass pellets making machine manufacturers suggest that when purchasing equipment, you must pay attention to the type of raw material pellets you want to recycle, so that you can buy the same type of equipment.

In addition, when purchasing a fuel biomass pellet machine, you must also pay attention to the following aspects:

Determine the type of raw material, main purpose and working voltage that the biomass pellets making machine should produce and manufacture.

At this stage, there are about three types of customers who purchase biomass pellets making machines in the sales market. They are private enterprises that are individually or individually established, fuel pellet manufacturers that purchase equipment to deal with raw materials at their own processing plants, agents and trading shops.

For customers who are self-employed by individuals or private enterprises, when purchasing a pellet machine, it is necessary to clarify the types of raw materials produced by the company.

The general-purpose biomass pellets making machine only recycles the type of raw material that suits you, which is also the common fuel pellet raw material on the market. If there are special fuel pellets to establish sales channels, customers can also purchase the corresponding biomass fuel pellet machines.

1.RICHI biomass pellet mill for sale

biomass pellets making machine

The biomass pellets making machine solves the problem of difficult disposal of straw and wood chips. Save a lot of energy. Reduced environmental pollution. It is an environmentally friendly mechanical equipment.

(1) Improve the quality of life. Improve rural environmental conditions.

Sawdust fuel has lower sulfur and ash content than coal and lower combustion temperature, which can replace coal. Improve people’s indoor hygiene, reduce the stacking and transportation of ash in the village, and indirectly beautify the appearance of the village.

(2) Reduce carbon dioxide emissions. Clean the atmosphere.

During the cycle from biomass pellet production to combustion utilization. The net increase in carbon dioxide in the atmosphere is zero.

(3) Reduce the economic burden of farmers and help farmers increase their employment income.

Increasing farmers’ consumption of wood pellets can reduce coal purchases. Thereby reducing cash outlay; the collection and supply of sawdust can create many new jobs and bring benefits to people.

(4) Improve the utilization rate of energy and ensure the supply of renewable energy.

Coal can be used for large-capacity units to generate electricity or for other purposes. The emergence of fuel pellets can not only ease the tight coal supply situation. It can also avoid waste caused by inefficient use of coal in rural areas.

(5) Conducive to the realization of sustainable development.

Sawdust fuel is biomass fuel. is renewable energy. Sustainable development, while oil, natural gas, and coal are non-renewable energy sources.

Therefore, customers who want to invest in biomass pellets making machines need not worry too much. It can not only create wealth, but also an environmental protection device that benefits the country and the people.

Biomass pellets making machine equipment is not only a need for rural development. It is also the fundamental need to reduce carbon dioxide and other gas emissions, protect the environment, and implement sustainable development strategies.

2.The sufficient raw materials for biomass pellets making machine

The raw materials required by the biomass pellets making machine are sufficient.

The biomass pellets making machines are mainly aimed at waste wood chips and straw, and these two types of materials are also the most produced in our country and need to be dealt with the most, construction waste, domestic waste, and furniture industry all the time.

A large amount of waste wood, if these waste wood are directly discarded, will pollute the environment and waste renewable resources. There is also straw.

A large amount of straw is produced every autumn. In the past, ordinary people directly burned the straw, which not only wastes resources, but also greatly pollutes the environment. The disposal of crop straw is also a national and local government.

In this case, a machine that can process wood chips and straw to turn waste into treasure is particularly important, and the importance of biomass pellets making machines, wood pellet machines and straw pellet machines at this time becomes apparent.

RICHI MACHINERY has been established for more than 25 years, specializing in biomass pellet mill for sale, the development and production of single/complete pellet production lines such as animal feed, biomass fuel, wood waste, grass, straw, organic fertilizer, etc., and provide design and services for EPC/Turnkey projects!

wood pellet mill for sale

How to solve the fault of wood pellet mill?

(1) After the wood pellet mill produces pellets, it is found that the surface of the pellets is uneven and even there are many excess wounds on the pellets. This problem shows that there is a problem with the blades inside the sawdust pellet machine. If the blades are intact, the surface of the pellets produced is very smooth. And they are almost equal in size.

(2) The surface of sawdust pellets is too smooth, which is also a problem, which can indicate that the mechanical hard object is too high, the compression of the ring die is relatively small, and the compression hole should be enlarged. (Related post: wood pellet mill for sale

This phenomenon is relatively rare, and it is rarely encountered. However, it should be avoided as much as possible during early construction. The first thing to do is to check the raw materials before construction to see if there are any hard objects. This is very important.

(3) When the moisture content of sawdust ellets is too high, the machine is often blocked, so we try to carry out construction after testing the moisture content of the pellets. When the construction is carried out, it will increase the load on the machinery and affect the normal operation of the wood pellet mill.

(4) Cracks occur in the machinery itself of the sawdust wood pellet mill. This phenomenon is very obvious. Generally, such a failure of the pellet machine will be heard from the sound.

The wood pellet mill makes a loud noise during operation, or there are many Noise, this phenomenon means that there is a fault, so we must stop the operation for inspection. After the wood pellet making machine is put into use, we often encounter problems with the quality of the machine itself.

Most of the reasons are due to the long-term use of the customer. Caused, so we must pay attention to this when running the wood biomass pellet press machine.

If you want to know more about wood pellet mill for sale, sawdust pellet machine, straw pellet machine, rice husk pellet machine, peanut shell pellet machine, pellet machine production line, please continue to pay attention to Richi Machinery.

1. How to increase production and be efficient?

Four great tricks for your wood pellet mill machine to increase production and be efficient!

The wood pellet mill is difficult to discharge, not smooth, or even powder, which makes people very headache. It is like a person’s constipation. No more constipation:

(1) The pressing roller in the wood pellet mill is an important part in the compression chamber. It needs constant rotation to make the material extruded from the die hole under the action of rolling. However, when the pressure roller is loose, the gap between the pressure roller and the mold will become larger, and the pressure will be reduced, so naturally the material cannot be discharged smoothly.

(2) The motor of the wood pellet mill needs a certain voltage to work normally. If the voltage is too low, even if the motor can rotate the power generated by it, it will not be enough to quickly extrude the material in the compression chamber. At this time, a large amount of material will be blocked in the compression chamber, affecting production.

(3) During the production process of the biomass wood pellet maker machine, due to the slow speed of extruding the material or the blockage of the die hole, it may cause the straw pellet machine to extrude the material obstacle. In this way, a large amount of material is blocked in the compression cavity, making the sawdust wood pellet mills machine can’t stop.

When the main bearing of the wood pelleting machine is damaged, the pressing parts in it will not be able to work, and a large amount of material cannot be discharged in the compression chamber and will be blocked in it.

If you want to know more about shaving wood pellet mill for sale Germany, log wood pellet mill for sale Iceland, biomass wood pellet mill for sale Brazil, wood pellet mill for sale Indonesia, wood pellet mill for sale Malaysia, wood pellet mill for sale Thailand, wood pellet mill for sale Canada, please contact Richi Machinery for details. (Related post: fuel pellet plant

2. The output of fuel pellet mill machine is affected by those factors

wood pellet mill for sale

The same fuel wood pellet mill has different output, why? The biomass new energy industry is developing rapidly, and the fuel pellet machine has been familiar to more and more people. There are also many people who judge the situation and seize the opportunity of this industry to engage in the production of wood pellets.

Of course, the quality and standard of the fuel pellet machines produced by different manufacturers are also different. Often, many customers bring materials to the manufacturer to test the machine with high output, but if they buy the equipment back and produce it themselves, the output will be too low. So the question is, the same equipment has different output, why?

Factors affecting the output of the fuel pellet mill machine include:

(1) The grinding of the new mold of the wood pellet mill is very important. The new mold has a certain running-in period and needs to be ground with oil. Under normal circumstances, the moisture content of wood chips should be controlled between 10-15%. Adjust the gap between the pressure roller and the mold to make it in the best state. After adjusting the pressure roller, the fixing bolts must be screwed tightly.

(2) The size and moisture content of the material. The size of the material that the fuel wood pellet mill can achieve uniform discharge must be smaller than the diameter of the particle, the diameter of the particle is 6-8 mm, the size of the material should be smaller than it, and the moisture of the raw material must be between 10-15%, too much or too little moisture will affect particle yield.

(3) Select the appropriate compression ratio of the fuel wood pelletizing machine mold. Different materials correspond to the compression ratio of different molds. The compression ratio can be determined when the manufacturer is testing the wood pellet mill. The key problem is that you should not easily replace the material after you buy the equipment.

If the material is replaced, the compression ratio will change, and the corresponding mold will need to be replaced. Discharge is sometimes out, sometimes out, which may be related to the aging degree of the machine mold, which needs to be replaced with the appropriate mold in time. (Related post: biomass wood pellet plant in Indonesia

The output of the model is different, and the life of the mold is also different. Taking the 550 type wood pellet mill machine as an example, its die life is about 1000 hours.

RICHI Machinery is a industrial group mainly specialized in the feed pellet machinery, and also covers some other strategic businesses such as wood pellet mill for sale, organic fertilizer pellet machinery, parts and components and so on.

RICHI Machinery has covered more than 109 countries and regions around the world from 1995, products are exported to the Middle East, South America, Africa, Southeast Asia and high-end markets such as Europe and the United States.

poultry feed pellet making machine

CE poultry feed pellet making machine Introuduction & Price

Poultry feed pellet making machine has the characteristics of compact structure, beautiful appearance, large diameter of feed opening, ring die design, suitable for making feed pellets, high output, low power consumption, convenient use and reliable working performance. The pressure rollers are evenly arranged, and the operation is stable.

At the same time, the pressing area is increased, and the production efficiency is improved. The screw center pressure regulating structure is adopted, and the gap between the molds increases and decreases, and it is suitable for different materials to ensure the pressing effect.

poultry feed pellet making machine

1.The scope of application of the poultry feed pellet making machine:

It is widely used in large, medium and small aquaculture, grain and poultry feed plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small poultry feed processing plants. The following is a detailed introduction to the RICHI poultry feed pellet making machine.

(1) Raw materials of poultry feed pellet making machine:

Feed processing machinery that directly presses pellets with crushed materials such as corn, soybean meal, straw, grass, rice husk, etc.

(2) The working principle of the poultry feed pellet making machine:

RICHI poultry feed pellet making machine achieves the goal of feeding dry in and dry out. Through the extrusion between the pressing roller and the die plate, the temperature of 80°C can be reached during the production process, and the pellets with smooth surface and uniform body can be processed. And have a certain hardness.

Moreover, users can choose different apertures and compression ratios according to their different needs to obtain the best technology and economic benefits. The poultry feed pellet making machine uses a motor as the driving shaft for power, and operates cyclically on this basis. It drives the main shaft through gears to rub the die plate and the pressure roller, and the resulting friction temperature (between the pressure roller and the die plate) can be up to 80°C.

The raw material passes through the high temperature, under the extrusion of the pressing roller and the die plate, and passes through the holes on the die plate, and the high-quality molding particles will roll out from the discharge port. (Related post: cat litter making machine )

(3) Advantages of feed pellets produced by RICHI poultry pellet machine:

High hardness, smooth surface and internal ripening, which can improve the digestion and absorption of nutrients. The particle formation process can denature the pancreatic enzyme resistance factor in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various insects and digestive system diseases. Compared with mixed powder feed, higher economic benefits can be obtained.

(4) R&D strength of Richi Machinery:

The poultry feed pellet making machine is a new type of energy-saving equipment independently developed by Richi Machinery. Richi Machinery has a first-class R&D team, which consists of the poultry feed pellet making machine research and development project department, the biomass pellet machine research and development project department, and the organic fertilizer pellet machine research and development project department.

Project Department. Richi Machinery has advanced machinery manufacturing equipment, strong development strength and perfect after-sales service. It is a professional manufacturer of pellet machinery in China that researches, develops, manufactures, installs and debugs.

2.The price of poultry feed pellet making machine

The price of poultry feed pelleting machine is usually 7000-100000USD, and the output of poultry feed that can be processed is 1-48t/h. If the grass-containing feed is to be processed, the yield is slightly lower, and these are determined according to the customer’s actual raw materials and formulations.

3.Why choose RICHI poultry feed pellet making machine?

(1) RICHI Machinery feed pellet machine has passed a number of patents and won a number of patent certificates.

(2) It has passed the international ISO9001 and EU CE certification, and is a new energy machinery manufacturing enterprise encouraged by the state. (Related post: cat litter production line)

(3) All models have passed the agricultural machinery promotion appraisal of the Ministry of Agriculture, and all of them have passed the inspection.

(4) Some provinces and regions have passed the national agricultural machinery purchase subsidies, and the purchase of agricultural machinery can enjoy government subsidies.

(5) Richi Machinery develops year by year, products are constantly updated, advanced processing equipment, exquisite craftsmanship, and strict inspection and testing ensure higher quality of products. The poultry feed pellet making machines are all over the country and exported to Europe, America, Asia, Africa, etc. international market.

(6) Perfect after-sales service, all purchasers only need to rely on the “product quality warranty card”, you will enjoy one-year warranty and lifetime maintenance after-sales service.

(7) The poultry feed pellet making machine produced by Richi Machinery have won the titles of “Famous Products” and “Quality Trustworthy Products” for many times.