Feed Pellet Machine

Chicken feed manufacturing plant working process

Chicken feed manufacturing plant is mainly used to produce various kinds of chicken feed pellets, such as baby chicken feed pellets, laying chicken feed pellets, hens feed pellets, and broiler feed pellets. The working process is mainly precleaning, crushing, mixing, pelletizing, cooling, screening and packing.

chicken feed macnufacturing plant

The equipment of the precleaning section is drum type precleaner, powder sieve, and permanent magnet sleeve. This section is to remove impurities such as rope, paper, stones, and iron filings mixed in the raw materials. After being cleaned, the raw materials are sent to the precrushing bin by the bucket elevator. Then, raw materials enter the feed grinder machine. The feed grinder machine is crushing the raw materials into powder which is convenient for the subsequent procedures. After that, the powder is transmitted to the feed mixer machine. The feed mixer machine is for the distribution evenly of raw materials and other additives. Then all the materials enter the chicken feed pellet machine. The chicken feed pellet machine is a vital machine in the production of feed pellets. In pelletizing section, the materials, through conditioning, enter the pelletizing chamber. In the chamber, the powder is strongly squeezed by the ring die and the pressure roller to form pellets. To make the pellets save longer, they are transmitted to the counterflow cooler to adjust the temperature. After cooling, the pellets can be packed.

In using the chicken feed pellet machine, you should be attention to the following tips.

  • Chicken feed pellet machine for sale and also its upper magnet is needed to be regularly cleaned. If you do not clean, the iron in the feed inlet may enter the ring die of the chicken feed pellet machine, which affects the normal working of the equipment.
  • The wear solution of the ring die and pressure roller should be checked at set intervals. The wear of the pressure roller may affect the production capacity, which would influence the quality of pellets.
  • Checking the cutter of the chicken feed pellet machine. The cutter is worn too blunt, which would decrease the forming rate of the feed pellets.
  • When changing raw materials, the cone bucket above the chicken feed pellet machine and the finished product bin should be completely emptied to prevent mixing.
  • You can extend the conditioning time. This can increase starch pasting and reduce the production of harmful microorganisms. It also can improve production efficiency and pellet quality.

Animals need to eat nutritionally balanced feed for a long time to get benefits, which are closely related to the operation of animal feed equipment. How can a chicken feed pellet machine be more durable? You need to pay attention to the following points.

  • Do a good job in the test run before the formal production. Before using the new pressed film, the hole of the ring die should be checked to whether it is smooth and vertical and whether the hole inlet is correct and smooth. After the heat treatment of the ring die, it should be checked whether the die hole is polished or not, and whether the finish of the die hole is enough or not.
  • Reasonably master the load of the chicken feed pellet machine. The load degree of the animal feed equipment has a great impact on the output and quality of the feed pellets.
  • The moisture content of materials should be controlled. If the moisture content of the material is appropriate, the output and quality of the chicken feed pellet machine can be improved. For the safe storage and transportation of granular materials, the moisture content should be well controlled.

Thus, before the chicken feed pellet machine is formally put into use, the above points must be carefully checked. In the whole chicken feed manufacturing plant, inspection and maintenance of the equipment are required before production to ensure the quality of the pellets.

RICHI Machinery, located in Zhengzhou, Henan Province, China, has been engaged in the production of pellet manufacturing equipment for more than 27 years. RICHI can provide you with various chicken feed manufacturing plant of 1-100t/h. RICHI Machinery also provides a one-stop service. It has a professional system from structural design, equipment production, and installation to after-sales service.

richi machinery

floating fish feed making machine

Introduction of floating fish feed making machine

In order to reduce the feed cost and fish diseases in aquaculture farms, Richi Machinery has launched a floating fish feed making machine; the fish pellet feed produced by the fish feed pellet extruder can effectively prevent and control fish diseases.

1.Useof floating fish feed making machine

Fish feed pellet machine is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small floating fish feed production line.

2.Precautions when using floating fish feed making machine

  • When the fingerlings are stocked, when the water temperature is low, the growth is slow, and the size is small, the pellet diameter of the feed should be controlled at about 2mm; when the temperature rises and the growth of fingerlings is accelerated, the diameter of the feed pellets in the mid-term should be 3-3.5mm , and later in 4-4.5mm.Therefore, when using the floating fish feed making machine to process fish pellet feed, the size of the feed pellets should be adjusted according to different periods to achieve the best feeding effect.
  • Because the fish has no stomach, the feed stays in the intestinal tract for a very short time, and the digestion and utilization rate is not high; therefore, when feeding the feed, it should be fed several times, and each feeding should be a little less feed utilization.
  • Fish pellet feed contains 12% – 14% of water during the floating fish feed making machineproduction process, and it is not easy to store for too long, so as to avoid deliquescence, mildew, and disease after feeding the fingerlings, so it is best to produce and feed it at the same time.
  • In order to better prevent the release of diseased fish fingerlings, adding 1% salt to the feed powder before production can effectively prevent the occurrence of diseases of fingerlings.

3.Performance of floating fish feed making machine

  • Scientific and reasonable structural design, simple, small footprint and low noise.
  • Small floating fish feed making machine for dry in and dry out, easy to make materials, high output and low energy consumption.
  • This floating fish feed making machine has a high pellet forming rate, and the resulting pellets have high hardness and smooth surface, which is convenient for storage and transportation.
  • This model floating fish feed making machineis equipped with Ø1.5—- Ø20 kinds of aperture molds, which are suitable for granulation of different materials and achieve better results.
  • Adapt to different materials to ensure the pressing effect.
  • Simple operation and maintenance, safe and reliable
  • Strong adaptability to the workplace
  • The floating fish pellet machinebody is cast as a whole, the structure is firm and the appearance is beautiful, and the service life is long.

floating fish feed making machine

4.Advantages of RICHIfloating fish pellet machine

  • Uniform discharge, smooth pellets, and output increased by 50%.
  • The produced granules by floating fish feed making machine are formed at one time, with high hardness, smooth surface and sufficient internal ripening, which can improve the digestion and absorption of nutrients. Better for storage.
  • The floating fish feed making machine has humanized design, small footprint, low noise, emergency button, simple and safer operation.
  • RICHI floating fish food machine can be customized according to customer needs.
  • RICHI floating fish feed making machine belongs to the factory direct sales, there is no middleman, the price is cheap, the profit is low, and it is all installed and debugged before delivery, and then packed and shipped.
  • RICHI floating feed making machine is packed in plastic (plastic waterproof) before delivery.
  • Before the final delivery, the floating fish feed pellet making machine is put on all-wood packaging, and the whole machine is packed in a wooden box to ensure that the floating pellet machine reaches the destination safely and without damage.

5.Process composition of floating fish feed extruder:

  • Mixing machine: Add a certain proportion of water to the raw materials, such as corn flour, rice flour, soybean flour, fish meal, meat meal, grain flour, additives, etc., and mix them evenly.
  • Feeder: Using the motor as the power for screw conveying, the mixed raw materials are transported to the feeding hopper of the floating fish feed extruder machine to ensure convenient and fast feeding.
  • Twin-screw floating fish feed extruder: In the case of high temperature and high pressure environment and screw extrusion, the mold can be replaced by adjusting the process to produce different feeds, and the specific pelletsize and shape can be changed.
  • Conveyor: to transport the feed to the oven.
  • Multi-layer oven: Most of the ovens are electric ovens, the temperature is adjusted between 0-200 degrees through the control cabinet, and the interior is a stainless steel double-layer mesh bag, which reduces the moisture of feed pellets, promotes the curing rate, and increases the shelf life.
  • Seasoning line: The oil sprayer sprays oil, food attractant, etc. The seasoning drum includes octagonal drum, cylinder, lifting single drum, and double drum seasoning line. According to the output and product properties, the oil is sprayed on the surface of the feed, and sprayed at the same time. Minced meat and spices, sprinkle evenly.
  • Cooling and conveying: reduce the temperature of frying and feed, promote the solidification of oil, reduce the temperature of pellets, and facilitate packaging.
  • Vibrating sieve: sieve off excess external material and pellets at the end of the year to ensure the quality and the reuse of raw materials.
  • Packaging machine: manual sealing machine and automatic packaging machine can be used.

6.Questions about floating fish feed making machine

(1)Q: Which is the best small floating fish feed making machine?

Answer: At present, there are many manufacturers of small floating fish feed pellet machines, which are mixed. In order to avoid purchasing machines with poor quality, users should choose regular manufacturers to buy them.

A professional floating fish feed making machine manufacturer should have the following three points:

  • A regular floating pellet machine manufacturer.
  • Excellent machine quality,
  • Perfect after-sales service.

(2)Q: Is the small floating fish feed making machine durable? how much is it?

Answer: You must be familiar with the small floating pellet machine. What is the effect of this machine? Is it easy to use? This floating fish feed making machine is a feed processing equipment specially designed for breeding poultry.

  • The compound feed formula has a variety of raw materials. Nutritional balance.
  • Reduce disease and improve survival rate.
  • Save feed cost for breeders and improve economic benefits. The specific price requires the user to determine the model first, and then let the floating pellet machinemanufacturer quote.

(3)Q: How much is the price of the small floating feed extruder machine?

Answer: The decisive factor for the price of the small floating feed extruder machine lies in the output, raw materials and power. The higher the output, the higher the price of the corresponding floating fish feed making machine, and the greater the power, the higher the price.

Therefore, before purchasing, first decide how much output you want, and then let the floating fish feed making machine manufacturer give an accurate quotation.

(4)Q: How much is the small fish feed pellet machine?

A: The power of the small floating fish feed making machine is 2.2kw with two-phase electricity, and the hourly output of feed pellets is about 60-100 kilograms. The price of a high-quality machine with a motor is about 2000-200000USD.

(5)Q: What is floating feed machine price?

Answer: Thefloating fish feed pellet mill is a multi-functional feed pellet machine, which can be used to process animal feeds such as chickens, ducks, and geese, improve the survival rate. The price is 2000-200000USD.

poultry feed pellet making machine

CE poultry feed pellet making machine Introuduction & Price

Poultry feed pellet making machine has the characteristics of compact structure, beautiful appearance, large diameter of feed opening, ring die design, suitable for making feed pellets, high output, low power consumption, convenient use and reliable working performance. The pressure rollers are evenly arranged, and the operation is stable.

At the same time, the pressing area is increased, and the production efficiency is improved. The screw center pressure regulating structure is adopted, and the gap between the molds increases and decreases, and it is suitable for different materials to ensure the pressing effect.

poultry feed pellet making machine

1.The scope of application of the poultry feed pellet making machine:

It is widely used in large, medium and small aquaculture, grain and poultry feed plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small poultry feed processing plants. The following is a detailed introduction to the RICHI poultry feed pellet making machine.

(1) Raw materials of poultry feed pellet making machine:

Feed processing machinery that directly presses pellets with crushed materials such as corn, soybean meal, straw, grass, rice husk, etc.

(2) The working principle of the poultry feed pellet making machine:

RICHI poultry feed pellet making machine achieves the goal of feeding dry in and dry out. Through the extrusion between the pressing roller and the die plate, the temperature of 80°C can be reached during the production process, and the pellets with smooth surface and uniform body can be processed. And have a certain hardness.

Moreover, users can choose different apertures and compression ratios according to their different needs to obtain the best technology and economic benefits. The poultry feed pellet making machine uses a motor as the driving shaft for power, and operates cyclically on this basis. It drives the main shaft through gears to rub the die plate and the pressure roller, and the resulting friction temperature (between the pressure roller and the die plate) can be up to 80°C.

The raw material passes through the high temperature, under the extrusion of the pressing roller and the die plate, and passes through the holes on the die plate, and the high-quality molding particles will roll out from the discharge port. (Related post: cat litter making machine )

(3) Advantages of feed pellets produced by RICHI poultry pellet machine:

High hardness, smooth surface and internal ripening, which can improve the digestion and absorption of nutrients. The particle formation process can denature the pancreatic enzyme resistance factor in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various insects and digestive system diseases. Compared with mixed powder feed, higher economic benefits can be obtained.

(4) R&D strength of Richi Machinery:

The poultry feed pellet making machine is a new type of energy-saving equipment independently developed by Richi Machinery. Richi Machinery has a first-class R&D team, which consists of the poultry feed pellet making machine research and development project department, the biomass pellet machine research and development project department, and the organic fertilizer pellet machine research and development project department.

Project Department. Richi Machinery has advanced machinery manufacturing equipment, strong development strength and perfect after-sales service. It is a professional manufacturer of pellet machinery in China that researches, develops, manufactures, installs and debugs.

2.The price of poultry feed pellet making machine

The price of poultry feed pelleting machine is usually 7000-100000USD, and the output of poultry feed that can be processed is 1-48t/h. If the grass-containing feed is to be processed, the yield is slightly lower, and these are determined according to the customer’s actual raw materials and formulations.

3.Why choose RICHI poultry feed pellet making machine?

(1) RICHI Machinery feed pellet machine has passed a number of patents and won a number of patent certificates.

(2) It has passed the international ISO9001 and EU CE certification, and is a new energy machinery manufacturing enterprise encouraged by the state. (Related post: cat litter production line)

(3) All models have passed the agricultural machinery promotion appraisal of the Ministry of Agriculture, and all of them have passed the inspection.

(4) Some provinces and regions have passed the national agricultural machinery purchase subsidies, and the purchase of agricultural machinery can enjoy government subsidies.

(5) Richi Machinery develops year by year, products are constantly updated, advanced processing equipment, exquisite craftsmanship, and strict inspection and testing ensure higher quality of products. The poultry feed pellet making machines are all over the country and exported to Europe, America, Asia, Africa, etc. international market.

(6) Perfect after-sales service, all purchasers only need to rely on the “product quality warranty card”, you will enjoy one-year warranty and lifetime maintenance after-sales service.

(7) The poultry feed pellet making machine produced by Richi Machinery have won the titles of “Famous Products” and “Quality Trustworthy Products” for many times.